Advertisement
MVi
Digital Audio Interface
Sample Rate and Bit Depth settings are found in a drop down menu in the
audio or sound control panel of your computer. You can adjust these variables
to fit your needs. Select a lower sample rate for podcast recording, when it
is important to have a smaller file for easy download. Select a higher sample
rate for music and more dynamic recordings.
Troubleshooting
Issue
The display does not
Make sure that the MVi is fully plugged in.
illuminate
Check the computer sound control panel settings.
Audio is too low
When first connecting the MVi to your computer,
make sure to raise the computer volume level.
Check the sound control panel of the computer to
Audio sounds bad
ensure that the MVi is fully plugged in and
System Requirements and Compatibility
Windows
Macintosh
Specifications
MFi Certified
Yes
DSP Modes (Presets)
Speech/Singing/Acoustic/Loud/Flat
Input
Combination XLR and 6.35 mm (1/4") TRS
Input Impedance
1/4 inch instrument input>1 MΩ
Bit Depth
16-bit/24-bit
Sampling Rate
44.1/48 kHz
Frequency Response
20 Hz to 20,000 Hz [1]
4/5
Solution
recognized.
Windows 7 and higher
•
Minimum RAM = 64 MB
•
• USB 2.0
OS X Lion 10.7 and higher
•
Minimum RAM = 64 MB
•
• USB 2.0
Tip: Record at a higher sample rate and bounce down to an M4A for a file
with the highest sound quality at a manageable size.
Tip for PC users: Make sure that the sample rate and bit depth microphone
settings, found in the sound control panel of the computer, match with the
sample rate and bit depth selected in your software.
Issue
Use the audio meter to ensure that volume peaks
are within the target range. If level is reaching the
Audio is distorted
red peak indicator of the input meter, turn the gain
Make sure that the sample rate and bit depth
microphone settings, found in the sound control
Audio sounds
panel of the computer, are consistent with the
unnatural or jittery
sample rate and bit depth selected in your
Device not working
The MVi requires 250 mA per port. Check USB
with USB hub.
hub documentation for current/port specification.
iOS
iPhone
iPod Touch
iPad
iPad Mini
Adjustable Gain Range
3-pin XLR
6.35 mm (1/4") TRS
Maximum Input Level
3-pin XLR
6.35 mm (1/4") TRS
Headphone Output
3.5 mm (1/8")
Power Requirements
Powered through USB or Lightning connector
Phantom Power
+48V USB/+12V iOS
Mute Switch Attenuation
Yes
Shure Incorporated
Solution
down.
software.
iOS 10.0 and higher
•
iPhone 5 and higher
•
• 5 th gen
iPad 4th gen and higher
•
iPad Mini 1st gen and higher
•
0 to +36 dB
+9 dB
0 dBV [1]
+9 dBV [1]
2017/11/01
Advertisement
