One Touch Memory - Binatone SPIRIT 710 User Manual

T elephone operation continue...
To answer a
call
To adjust the
speakerphone
volume
To end a call
To switch
between the
Handset and the
Speakerphone
To mute the
mouthpiece or
microphone
1
2

6. One Touch Memory

Store (M1,
1
M2,M3)
Memory
M1 M2
2
M3
Binatone Help Line - 0845 345 9677
When the phone rings;
Lift the handset or press the SPEAKERPHONE
button on the Base unit.
The display shows the duration of the call in
minutes and seconds.
During a call;
Adjust the volume of the speakerphone to your
comfortable volume level using the SPEAKERPHONE
volume switch located at the right side of the Base unit.
Replace the Handset on the Base unit cradle or
press the SPEAKERPHONE button on the Base unit.
The SPEAKERPHONE light indicator will turn OFF.
During a phone conversation through the Handset,
press the SPEAKERPHONE button to speak hands-free.
The Speakerphone light will turn on, but conversation
remains through the Handset until the Handset is
replaced on the Base unit cradle.
While in speakerphone mode, lift the Handset to
enable a private conversation.
During a call, you can mute the microphone
or the mouthpiece so that the person on the
other end cannot hear you.
Press MUTE button once.
While the microphone is muted, MUTE
be shown on the lower right corner of the display.
Press MUTE button again to get back to the
call.
In standby mode, press the MUTE/STO button
Key in the telephone number you wish to store,
up to a maximum of 24 digits.
Press the M1,M2, or M3 button to store the
number in the selected memory
Calls are charged at Local Call rate.
12
MUTE will
MUTE
MUTE MUTE