Binatone SPIRIT 710 User Manual page 25

Remote operation continue...
To check 1
your
messages
2
from a
3
remote
location
4
Notes:
During remote operation, you must press a key within
otherwise the machine will cut off your call.
During remote operation, the playback is paused
about minutes, and to continue the " 2 " key must be pressed
2¾
within 10 seconds, or the machine will cut you off.
Using the
remote
instruction
code
1
Using a tone dialling phone, dial your home phone number.
2
When you hear your outgoing message, press
3
Key in your remote PIN (security code).
The default code is 321. For details on how to set a new code, see the User
Guide.
4
Press 2 to play back your messages.
ABC
5
You can also use the keys shown on the back of this card.
Binatone Help Line - 0845 345 9677
Using a tone dialing phone, dial your home
phone number.
Listen to or bypass the OGM (by pressing *).
Enter your REMOTE ACCESS Code. A list of
options will be heard.
Press keypad "2" to playback your messages.
For other instructions, see the Remote
Intruction code menu shown on the next page.
automatically after
The following is the Remote Instruction Code Help Menu:
To bypass the Outgoing Message, press "*"
To play new messages, press "2"
After playing back new messages, press "2"
again to play all recorded messages.
To pause and restart during message
playback, press "2" playback can be paused for
,
up to 30 seconds, but after that the playback
automatically restarts.
Spirit 710
Remote operation
Calls are charged at Local Call rate.
25
10 seconds,
.