To Adjust The Speakerphone Volume; One Touch Memory - Binatone Caprice 670 User Manual

All manuals and user guides at all-guides.com
T elephone operation continue...
3
Dial the telephone number.
If you make a mistake you can correct it by using the DEL
button to delete digits and then adding the right ones.
Lift the Handset or press the HANDSFREE
4
Handsfree
button on the Base unit to dial out the number.
When the phone rings;
To answer a
Lift the handset or press the HANDSFREE
call
Handsfree
button on the Base unit.
minutes and seconds.
During a call;
To adjust the
Adjust the volume of the speakerphone to your
speakerphone
comfortable volume level using the SPEAKERPHONE
volume
volume switch located at the right side of the Base unit.
Replace the Handset on the Base unit cradle or
To end a call
press the HANDSFREE button on the Base unit.
Handsfree
During a phone conversation through the Handset,
To switch
press the HANDSFREE button to speak hands-free.
between the Handsfree
Handset and the
The Speakerphone light will turn on, but conversation
Speakerphone
remains through the Handset until the Handset is
replaced on the Base unit cradle.
While in speakerphone mode, lift the Handset to
enable a private conversation.
During a call, you can mute the microphone
To mute the
or the mouthpiece so that the person on the
mouthpiece or
other end cannot hear you.
microphone
1 Press STORE/MUTE button once.
Store /
Mute
be shown on the lower right corner of the display.
Store /
2 Press STORE/MUTE button again to get back to
Mute
the call.

6. One Touch Memory

Store (M1,
1 In standby mode, press the STORE/MUTE button
Store /
Mute
M2,M3) Key in the telephone number you wish to store,
Memory up to a maximum of 24 digits.
Binatone Help Line - 0845 345 9677
The display shows the duration of the call in
The SPEAKERPHONE light indicator will turn OFF.
While the microphone is muted, MUTE
Calls are charged at Local Call rate.
12
MUTE will
MUTE
MUTE MUTE