Banner MINI-BEAM Expert Series Quick Start Manual

MINI-BEAM Expert Series
Quick Start Guide
Microprocessor-Based TEACH Mode Photoelectric Sensors
U.S. patent(s) issued or pending
Models
Retroreflective Models
Model 1
Sensing Mode
SME312LV Retroreflective, Visible red, 650 nm
SME312LP Polarized retroreflective, Visible red, 650 nm
Polarized retroreflective, Visible red, 650 nm
SME312LPC
(clear object)
Diffuse Models
Model 1
Sensing Mode
SME312D Diffuse, Infrared, 880 nm
SME312DV Diffuse, Visible red, 650 nm
SME312W Divergent Diffuse, Infrared, 880 nm
Convergent Models
Model 1
Sensing Mode
SME312CV Convergent, Visible red, 650 nm
SME312CV2 Convergent, Visible red, 650 nm
SME312CVG Convergent, Visible green, 525 nm
SME312CVB Convergent, Visible blue, 475 nm
SME312CVW Convergent, Visible white, 450–650 nm
1 Standard 2 m (6.5 ft) cable models are listed. To order the 9 m (30 ft) cable model, add suffix "W/30" to the model number (for example,
SME312LV W/30.) To order the 5-pin Euro-style QD models, add suffix "QD" (for example, SME312LVQD). Models with a QD connector require a
mating cable.
2 Sensing ranges vary according to the efficiency and reflective area of the retroreflector(s) used. (Retroreflective tape is not recommended for use
with Clear Object Detection models.) See Accessories and the Banner Engineering catalog for more information.
Original Document
68812 Rev. C
This guide is designed to help you set up and install the MINI-BEAM
complete information on programming, performance, troubleshooting, dimensions,
and accessories, please refer to the Instruction Manual at
www.bannerengineering.com. Search for p/n 55214 to view the Instruction Manual.
Use of this document assumes familiarity with pertinent industry standards and
practices.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel
protection. Doing so could lead to serious injury or death.
This device does not include the self-checking redundant
circuitry necessary to allow its use in personnel safety
applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Range or Focus 2
5 m (15 ft)
10 mm to 3 m (0.4 in to 10 ft)
1 m (3.3 ft) with supplied reflector
Range or Focus
380 mm (15 in)
1100 mm (43 in)
130 mm (5 in)
Range or Focus
16 mm (0.65 in)
43 mm (1.7 in)
16 mm (0.65 in)
16 mm (0.65 in)
13 July 2016
Supply Voltage
10 V dc to 30 V dc
Supply Voltage
10 V dc to 30 V dc
Spot Size at Focus Supply Voltage
1.3 mm (0.05 in)
3.0 mm (0.12 in)
1.0 mm (0.04 in) 10 V dc to 30 V dc
1.8 mm (0.07 in)
® ™
Expert . For
Output Type
Bipolar NPN/PNP
Output Type
Bipolar NPN/PNP
Output Type
Bipolar NPN/PNP
68812