Setup And Operation - Snailax SL-262A Use & Care Manual

Setup and Operation

1. Secure the cushion in place by wrapping the back elastic straps over the car
seat.
2. Connect the adapter cable to the corresponding cable at the side of the
cushion.
3. Plug the car adapter into your car's power receptacle.
4. Turn on the device using the controller (instructions on page 5).
5. When finished place the controller in the pouch at the side of the seat
cushion and unplug the adapter from the receptacle.
• Do not setup or use the massager when wet/damp, as such an environment
may reduce the lifespan of the massager mechanism.
• Ensure the massager is not exposed to direct sunlight or placed near sources
of heat.
Note:
This product produces a warming heat. It is not intended to be used as a
therapeutic heating pad. Please allow a few minutes to reach maximum
temperature. The cushion reaches a maximum temperature of 124F after
approx. 7 minutes.
3