Care And Cleaning Instructions; Troubleshooting Guide - Snailax SL-262A Use & Care Manual

Care and Cleaning Instructions

1. Do not wash in washing machine or immerse the product or the adapter in
water.
2. Always switch off before cleaning and remove the adapter from the socket with
clean, dry hands.
3. The massager should be wiped with a slightly moist cloth and dried
thoroughly. Do not wipe the product with alcohol or harsh chemicals such as
thinner or bleach.
4. Do not overstretch the elastic back straps.
5. Keep away from heat, fire or exposure to direct sunlight.
6. Store the massager in a cool, dry place out of reach of children.
7. Avoid contact with sharp edges or pointed objects which might cut or puncture
the fabric surface.

TROUBLESHOOTING GUIDE

Fault
The massage is not active in
all regions.
Device switches off suddenly
Device fail to start
Jerky motion of vibrations
from device
The massage motor for that region may
have been switched off. Press the button
that corresponds to that region to activate.
The device will switch off when the timer
runs out. Continue using by pressing the
'Power' button. If the device has run for
60 mins., turn back on after resting the
unit for 15 mins.
The device has an overheating protection
system be activated, device is switched off
for your safety. Please rest device for
15-30mins before restarting.
Check if device has been used for more
than 30 mins. If so, let device rest for 15
mins before continuing. Device may
require longer time to cool in warmer
environments.
Check if adapter is plugged into socket.
Check if adapter output is connected to
device power inlet wire.
Excessive pressure may have been applied
onto the device. Reduce the load and try
again.
6
Solutions