Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Snailax SL-262M
Summary of Contents for Snailax SL-262M
- Page 1 MEMORY FOAM MASSAGE CUSHION WITH HEAT SL-262M Use & care manual...
-
Page 2: Technical Data
Instruction Thank you for purchasing Memory Foam Massage Cushion with Heat. It combines Six Invigorating Massage motors and two heating pads on the back area, one heating pad on the seat to provide your full body with a soothing warmth and gentle vibrating massage. You will feel more relaxed rejuvenated. Please read all instructons carefully before using this product. -
Page 3: Setup And Operation
Setup and Operation 1. Secure the cushion in place by wrapping the back elastic straps over the car seat or chair. 2. Connect the adapter cable to the corresponding cable at the side of the cushion. 3. Plug the home adapter into an outlet or the car adapter into your car’s power receptacle. -
Page 4: Safety Instructions
Safety Instructions Please read the following instructions carefully before putting your massage device into use to ensure trouble-free operation and optimum efficiency. Please retain these operating instructions for further use! • Do not wet,do not use pins, never remove cover. •... -
Page 5: Controller Instructions
Controller instructions Power: Heat: Press to turn the Press to activate heat. massager on or off. The heat can be used independently of other functions, even with the power button off. Intensity: Press to choose vibration intensity (4 levels optional). Mode Indicators Mode: Press to change the... -
Page 6: Care And Cleaning Instructions
Care and Cleaning Instructions 1. Do not wash in washing machine or immerse the product or the adapter in water. 2. Always switch off before cleaning and remove the adapter from the socket with clean, dry hands. 3. The massager should be wiped with a slightly moist cloth and dried thoroughly. -
Page 7: Warranty Registration
Warranty 30-Day Money Back Guarantee for any reason Snailax product can be returned to receive a full refund for any reason within 30days. Please contact our customers service (support@snailax.com), our staff will contact you within 48 hours. 90-Day Money Back Guarantee for quality related issue Snailax product can be returned / replaced within 90 days if the product break down in the period of proper use. - Page 8 1687 Plymouth Rd, Unit C, Ann Arbor, MI, 48105 U.S.A Tel.+1.734.709.6982 support@snailax.com www.snailax.com...
Need help?
Do you have a question about the SL-262M and is the answer not in the manual?
Questions and answers
Controller not working. Stuck with green lights on INT and 30 min.
To fix the Snailax SL-262M controller that is not working and is stuck with green lights on INT and 30 min, follow these steps:
1. Check for Overheating Protection – If the device has been used for more than 30 minutes, it may have automatically shut off for safety. Let it rest for 15-30 minutes before restarting.
2. Verify Power Connection – Ensure that the adapter is plugged into a working socket and the adapter output is properly connected to the device’s power inlet.
3. Allow Cooling Time – If the environment is warm, the device may need additional time to cool down before it can function properly.
4. Restart the Device – Disconnect the power adapter from the outlet, wait a few minutes, then reconnect and try turning the device on again.
If the issue persists after these steps, the device may require further troubleshooting or warranty service.
This answer is automatically generated