Using applications
– DCR-TRV80 only
Using your camcorder as a Remote Camera, you can operate your camcorder remotely
from a computer or a PDA with Bluetooth (optional) etc. You can also transfer a still
image (Image Transport) between your camcorder and a computer or a PDA with
Bluetooth (optional) etc.
Using as a Remote Camera
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN and select PAGE3.
(2) Press RMT CAM.
Your camcorder is set to connecting standby.
For details, refer to the Network Function/Application Operating Instructions supplied
with your camcorder.
Image Transport
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN and select PAGE3.
(2) Press IMAGE TRANS.
For details, refer to the Network Function/Application Operating Instructions supplied
with your camcorder.
.
REMOTE CAMERA STANDBY
SONY DCR-TRV80
08 : 00 : 46 : 3E : 61 : C3
END
.
IMAGETRANS
RET.
SEND RECV
LOG
PLAY
171