Sony DCR-TRV75 Operating Instructions Manual page 124

Recording a picture from tape as a moving picture
Recording a moving picture from other equipment
You can use either A/V connecting cable or i.LINK cable. Connect the devices as
illustrated on page 87.
When connecting with the A/V connecting cable, set DISPLAY in
menu settings. (The default setting is LCD.)
The POWER switch should be set to
(1) Play back the recorded tape on the VCR, or turn the TV on to see a desired
(2) Press START/STOP at the scene where you want to start recording from.
Note
In the following instances, recording may stop in the middle, or distorted images may
be recorded:
– If the tape has a blank portion
– If recording from a tape in a poor condition, such as one that has been reused often for
recording
– If the input signal is cut off
124
program.
The image of the other equipment is displayed on the LCD screen or in the
viewfinder.
.
to LCD in the