Temperature Setting Lock; Programming The Change Filter Reminder - Sundance Spas 880 Series Owner's Manual

12.5 Temperature Setting Lock

The hot tub's temperature setting can be locked to prevent unauthorized
changes. When locked, all other hot tub buttons and functions operate
normally.
• To Lock Temperature Setting: Press (UP)
button to display temperature setting,
ately press the (DISPLAY)
buttons within five seconds each. A padlock symbol will
appear on the screen.
• To Unlock Temperature Setting: Press (UP)
button to display temperature setting, then immediately
press the (DISPLAY)
buttons within five seconds.

12.6 Programming the Change Filter Reminder

Your new hot tub is equipped with a programmable "Change Filter"
reminder icon that flashes on the control panel display after a
specified number of days. It is designed to remind you to inspect or
replace the MicroClean Plus filter cartridge on a regular basis but does
not affect hot tub operation in any way. Your hot tub's MicroClean Plus
filter cartridge is designed as a disposable cartridge and should be
replaced (thrown-out) every 6 months to ensure optimum water filtration.
The "Change Filter" reminder icon must be reset at each filter inspection/
replacement interval. It offers a selectable range from 10-120 days or
can be disabled (turned off). We recommend an initial setting of 120 days
(4 months) to remind you to check your MicroClean Plus cartridge after
your first 4 months of operation. At this time, you can easily determine
whether you need to change this interval by visually inspecting the filter
cartridge. Note: This reminder must be reset at each filter inspection/
replacement interval. Refer to Section 13.1 for filter replacement
instructions.
Programming Instructions
1. Press the (CYCLE)
reads "FIL" indicating the "Change Filter" display program has been
accessed.
2. Press (SELECT)
grammed duration or to view days elapsed since last filter cleaning
interval.
3. Press (UP)
follows: 0 - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120
- OFF. Note: Selecting "0" forces the Change Filter reminder icon to
stay on indefinitely.
Page 52
, (MODE)
button two times. The main display
button once to display the currently pro-
or (DOWN)
or (DOWN)
then immedi-
, (MODE)
, and (DOWN)
button to change duration setting as
, and (UP)
or (DOWN)
LOCKED
LOCKED