Main Control Panel Lock; Temperature Setting Lock; Programming The Change Filter Reminder - Sundance Spas ALTAMAR 880 User Manual

880 series
Hide thumbs Also See for ALTAMAR 880:
Table of Contents

Advertisement

13.5

Main Control Panel Lock

To help prevent unauthorized use of your hot tub, the Sentry controls
incorporate a unique panel locking system which disables the controls on
the panel.
To Lock The Main Control Panel: Press (diSPLAY)
(MOde)
each. A padlock symbol will appear on the LCD screen.
With the panel locked, all components are disabled from manual
activation and the only settings that can be adjusted are the standard
and economy filter/heating modes and time of day. All automatic hot
tub functions will operate normally.
To Unlock Main Control Panel: Press (diSPLAY)
(MOde)
onds. The lock symbol will disappear. All buttons are now active.
13.6

Temperature Setting Lock

The hot tub's temperature setting can be locked to prevent unauthorized
changes. When locked, all other hot tub buttons and functions operate
normally.
To Lock Temperature Setting: Press (UP)
(dOWN)
immediately press the (diSPLAY)
and (UP)
will appear on the screen.
To Unlock Temperature Setting: Press (UP)
(dOWN)
immediately press the (diSPLAY)
and (dOWN)
13.7

Programming the Change Filter reminder

Your new hot tub is equipped with a programmable "Change Filter"
reminder icon that flashes on the control panel display after a
specified number of days. It is designed to remind you to perform
routine filter system maintenance on a regular basis but does not affect
hot tub operation in any way. The "Change Filter" reminder icon must be
reset at each interval. It offers a selectable range from 10-120 days or
can be disabled (turned off). We recommend an initial setting of 30 days
(1 month) to remind you of this important maintenance step.
Note: This reminder must be reset at each filter inspection/replacement
interval. Refer to Section 14.1 for filter replacement instructions.
Programming instructions
1. Press the (CYCLe)
times in Economy Mode). The main display reads "FIL" indicating the
"Change Filter" display program has been accessed.
, and (UP)
, and (dOWN)
button to display temperature setting, then
buttons within five seconds each. A padlock symbol
button to display temperature setting, then
buttons within five seconds.
button two times (in Standard Mode, six
buttons within five seconds
buttons within five sec-
or
, (MOde)
, (MOde)
880 SERIES
,
,
LOCKED
,
or
,
LOCKED
Page 51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cameo 880Majesta 880Marin 880Maxxus 880Optima 880

Table of Contents