Memory Card Obelisk Top2, Reset - Theben TR Series Assembly And Operating Instructions Manual

OBELISK top2 memory card
Using memory card
 Insert memory card in the time switch.
 Request saved switch timings, read to/from
the time switch or start the Obelisk program.
 Remove OBELISK top2 memory card
(No. 9070404)
(optional) after
programming etc.
and store in cover.
Avoid mechanical over-
load or contamination
caused by other
storage/transport.
COPY OBELISK
-> TSWI
COPY TSWI
-> OBELISK
RUN OBELISK
CHECK
OBELISK
RESET
 Press the 4 buttons simultaneously.
You can choose between RETAIN PROGRAMS
and DELETE PROGRAMS.
GB
11