Table of Contents
Advertisement
3.3.10- Remote Access Configuration Sub-Menu
Remote Access
Enables remote access to system through serial port.
Disabled / Enabled
The following BIOS items are available only when Remote
Access is set to [Enabled].
Serial Port Number
Select Serial Port for cosole redirection. Make sure the selected port is enabled.
COM1 / BMC VUR
Serial Port Mode
Select Serial Port settings.
Flow Control
Select Flow Control for console redirection.
None / Hardware / Software
Redirection After BIOS POST
Disabled: Turns off the redirection after POST Boot Loader.
Boot Loader: Redirection is active during POST and during Boot Loader.
Always: Redirection is always active. (Some Oss may not work if set to Always)
Always / Disabled / Boot Loader
53
http://www.TYAN.com
Advertisement
Table of Contents
