TYAN S8028 Manual page 55

3.3.11 - USB Configuration Sub- Menu
Legacy USB Support
Enables support for legacy USB. AUTO option disables legacy support if no
USB devices are connected.
Enabled / Disabled / Auto
USB 2.0 Controller Mode
Configure the USB 2.0 controller in Hi Speed (480 Mbps) or Full Speed
(12Mbps).
Hi Speed / Full Speed
BIOS EHCI Hand-OFF
This is a work around for OSes without EHCI hand-off support. The EHCI
ownership change should claim by EHCI driver.
Enabled / Disabled
Legacy USB1.1 HC Support
Enables support for legacy USB. Auto option disables legacy support if no USB
devices are connected.
Enabled / Disabled
55
http://www.TYAN.com