Table of Contents
Advertisement
3.2
Display Icons and Symbols
The LCD display gives you information on the current status of the telephone.
Steady when the handset is in range of the base. Flashes when out of
range of the base or not registered to the base.
Steady when an intercom is in progress.
Flashes when there is an incoming internal call.
Indicates a call is in progress.
Indicates that handsfree is being used.
Indicates that the handset ringer is switched off.
Steady when an alarm is set. Flashes when an alarm time is reached.
Indicates that the keypad is locked.
Indicates when you have a new Voice Mail message. (This is a caller
display service and is not usually available from UK network providers.)
When not on a charger, indicates the battery is fully charged.
When on a charger, the whole icon flashes while the battery is being
charged, but when the battery is fully charged, only the internal block
of the icon flashes.
When not on the charger, indicates the battery needs charging.
Flashes when low battery power level is detected, including when first
put on charge.
Indicates when there are more characters or numbers in front of those
being displayed.
Indicates when there are more characters or numbers after those
being displayed.
LEFT SOFT KEY function. Press MENU/OK to access the main menu.
(MENU)
LEFT SOFT KEY function. Press MENU/OK to confirm the current
selection.
Indicates a new call in the call list.
Scroll up / down the menu items / Phonebook list / Redial list / Call List
RIGHT SOFT KEY function. Press C/MUTE to start an intercom call.
(INT)
10
Hide quick links:
Advertisement
Table of Contents
