Table of Contents
Advertisement
4.9.1
Redial a Number from the Redial List
1. In idle mode, press <DOWN/REDIAL> to access the redial list.
Note: If the redial list shows a name, press the < # > key to view the
number of this entry.
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK> / <SPEAKERPHONE> to dial to the selected redial
number.
Note: If there are no numbers in the redial list, the display shows " EMPTY ".
4.9.2
Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU/OK> to show ADD TO PB.
3. Press <MENU/OK> and then enter the name you want it to have in the
phonebook.
4. Press <MENU/OK> and then modify the number, if necessary.
5. Press <MENU/OK> to show <MELODY 1>.
6. Press <UP/DOWN> to browse the melody list. The respective melody
will be played when browsing the melody list.
(Note: The selected melody will only be played when you receive a call
if you subscribe to Caller Display and the incoming number matches the
stored number.)
7. Press <MENU/OK> to confirm, and the entry will be stored.
4.9.3
Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.9.1.
Press <MENU/OK> and <UP/DOWN> to select
2.
3. Press <MENU/OK> to confirm, and the entry will be deleted.
4.9.4
Delete All Redial List Entries
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.
3. Press <MENU/OK> to display CONFIRM?.
4. Press <MENU/OK> to confirm. All entries will be deleted and the display
will show EMPTY.
Using the corded base:
4.10
Making a call
1. Pick up the corded handset or press < SPEAKER > on the corded base.
2. Enter the phone number.
WARNING: There will be a 3-second delay, after picking up the corded
handset or pressing the <SPEAKER> button, before any digits
will dial out, but any digit keys pressed during this time will still
be detected and the numbers will be dialled out after the delay
period.
DELETE.
17
Hide quick links:
Advertisement
Table of Contents
