Output Signals In 24P (23.98P) Mode - Sony PDW-F30 Operating Instructions Manual

OPERATIONAL FUNCTION
SYSTEM SEL
SYSTEM FREQ : 601
* 60I
50I
30P
25P
23.98P
14
Press the m/MARK2 button to select "23.98P".
15
If you want to change the monitor output setting as
well, press the </IN button to return to the higher
level screen (the state of step 11). If you do not want
to change the monitor output setting, proceed to step
19.
16
Press the m/MARK2 button to select "23.9P
OUTPUT".
17
Press the ,/OUT button.
The setting value appears.
OPERATIONAL FUNCTION
SYSTEM SEL
23.9P OUTPUT: PsF
* 23.98PsF
2-3 PULL DOWN
18
Press the M/MARK1 or m/MARK2 button to select
one of the following.
23.98PsF: Output as 23.98P.
2-3 PULL DOWN: Output after pulldown conversion
to 59.94i.
19
Press the SET button.
A confirmation message appears.
20
Press the SET button to confirm the changes, or the
RESET button to cancel them.
If you have pressed the SET button, power the unit off
and on again to enable the changes.
30
24P (23.98P) Mode Settings
SETUP MENU
SETUP MENU

Output Signals in 24P (23.98P) Mode

The following tables show the signals output by the unit
when "23.98PsF" and "2-3 PULL DOWN" are selected.
Output signals
Output Type 23.98PsF
Output Composite No output
signals output
i.LINK DV
output
i.LINK TS
output
Timecode COMPOSITE –
output VITC output
Timecode display
Type 23.98PsF
LTC display 24-frame timecode
PDT display –
VITC display 24-frame timecode
COUNTER display 24-frame signals
Timecode in remote timecode mode
Type 23.98PsF
9-pin preset 24-frame timecode
timecode
9-pin preset 24-frame signals
timer 1 (Counter)
9-pin scene 24-frame timecode
timecode
9-pin scene 24-frame signals
timer 1 (Counter)
See the optional "9pin Manual 'PDW Series PROTOCOL
OF REMOTE(9-pin) CONNECTOR'" for more
information about remote timecode mode.
2-3 PULL
DOWN
Video and
audio signals
pulled down to
59.94i
30-frame
timecode after
pulldown
conversion
2-3 PULL DOWN
30-frame timecode
after pulldown
conversion
30-frame signals
after pulldown
conversion
2-3 PULL DOWN
30-frame signals
after pulldown
conversion
30-frame timecode
after pulldown
conversion
30-frame signals
after pulldown
conversion