Setup; Setting The Date And Time; Adjusting The Brightness Of The Lcd Panel - Sony PDW-F30 Operating Instructions Manual

Setup

The principal setup operations before operating this unit
are carried out using setup menus.
This section explains how to set the date and time and how
to adjust the brightness of the LCD panel.
See Chapter 6 "Menus" (page 75) for more information
about menu operations and menu items.

Setting the Date and Time

When using this unit for the first time, you should set the
date and time as follows.
Note
Before starting, press the DISPLAY button to set the
monitor video section to its largest size. Or connect an
external video monitor to this unit and superimpose menus
(see page 32) on the monitor screen.
1,4
F1
0 0 TCG
E X T
- 1 2 - 1 2
TC MODE F2
- 2 0 - 2 0
P R E S E T
- 3 0 - 3 0
ACCESS - 4 0 - 4 0
RUN MODE
- 6 0 - 6 0 F3
REC RUN
1 2 3 4
3 + 4
NETWORK 4 CH 16 BIT T C / V I T C
V I T C F4 CHAPTER
MPEG HD SP 1080 60I
LOCAL COOO1
VITC REM:077 M
D F / N D F
00: 00.00: 00 NDF
REMOTE F5 EXPAND
P2
LEVEL
PAGE DISPLAY
KEY INHI
CH 1 CH 2 CH 3 CH 4
PHONES
PRESET
PB
SHIFT
1
Press the MENU button.
The system menu appears on the monitor screen (see
page 77).
2
Select DATE/TIME PRESET using the M/MARK1
button or m/MARK2 button, then press the ,/OUT
button.
The DATE/TIME PRESET screen appears on the
monitor.
3 2,3
EJECT
VAR
MARK1
MENU
SUB THUMB IN OUT
CLIP NAIL SET RESET
JOG
CLIP ESSENCE
MENU MARK MARK2
PREV PLAY NEXT STOP TS REC
SHUTTLE
TOP F REV F FWD END STANDBY
4 3 3
DATE/TIME PRESET
YEAR
MONTH
DAY
TIME
TIME ZONE
This screen allows you to set the following items.
YEAR: Calendar year
MONTH: Month
DAY: Day
TIME: Time
TIME ZONE: Time zone (difference from UTC)
3
Set the date, time and time zone.
You can change the setting of the flashing digits.
To change the flashing digits
Use the arrow buttons (</IN, ,/OUT).
To increase or decrease the values of the flashing
digits
Use the arrow buttons (M/MARK1, m/MARK2) or jog
dial.
To return the settings to the initial values
Press the RESET button.
4
When you have made the necessary settings, press the
SET button.
The message "NOW SAVING..." appears, the settings
are saved, and the menu closes.
To clear the menu from the screen without saving
settings
Press the MENU button twice in succession.
Adjusting the Brightness of the LCD
Panel
Proceed as follows to adjust the brightness of the LCD
panel.
Note
Before starting, press the DISPLAY button to set the
monitor video section to its largest size. Or connect an
external video monitor to this unit and superimpose menus
(see page 32) on the monitor screen.
2006
04
08
10:09:17
UTC_00:00
INC/DEC : JOG DIAL
SHIFT : ( )( )KEY
DATE SAVE : SET KEY
TO MENU : MENU KEY
Setup
27