Sony PDW-F30 Operating Instructions Manual page 97

Alarm message in time
data display section
a)
Disc Top!
a)
Disc End!
MAX # Files
Disc Full!
b)
MAX# SB CLP
b)
CL OVER DUR
Run Salvage
a)
CNT mode!
a)
REGEN mode!
a)
REC RUN!
b)
REC mode!
b)
No SEL List
a)
No SUB CLIP
Alarm message in monitor video
section
DISC TOP.
DISC END.
DISC CANNOT BE RECORDED TO.
FOR MORE RECORDING SPACE,
DELETE CLIPS OR NON-AV DATA.
(GENERAL FILES)
DISC CANNOT BE RECORDED TO.FOR
MORE RECORDING SPACE, DELETE
OTHER CLIP LISTS.
DISC FULL.FOR MORE RECORDING,
DELETE SOME CLIPS.
NO MORE SUB CLIPS CAN BE ADDED
TO CLIP LIST.
DURATION OF ONE CLIP LIST MUST BE
LESS THAN 24 HOURS.
EXECUTE SALVAGE PROGRAM.
COUNTER MODE IS SELECTED.
SET COUNTER SELECT SWITCH TO TC
OR UB.
TCG REGEN MODE IS SELECTED.
SET TC PRESET MODE IN FUNCTION
MENU.
TCG RUN MODE IS SET TO REC RUN.
SET TC FREE RUN MODE IN FUNCTION
MENU.
THUMBNAIL(S) CANNOT BE
DISPLAYED DURING RECORDING.
CANNOT EXECUTE IN REC MODE.
DRIVE MAINTENANCE MENU CANNOT
BE EXECUTED WHILE IN REC MODE.
CLIP LIST IS NOT SELECTED.
CLIP LIST CANNOT LOCATE SPECIFIED
SUB CLIP(S).
Description/action
This appears if you press the PREV button or conduct
a high-speed reverse search when the unit is stopped
at the start of the disc.
Use forward search or playback instead.
This appears if you press the NEXT button or conduct
a forward high-speed search when the unit is stopped
at the end of the disc.
Use reverse search or playback instead.
Delete clips or GENERAL files.
Delete unneeded clips, or insert a disc with enough
free space.
Delete unneeded clips, or insert a disc with enough
free space.
This appears when an attempt is made to add sub
clips when 300 sub clips have already been
registered.
Limit the creation of sub clips to 300 or fewer.
This appears when you try to add a sub clip when the
total duration of sub clips in a clip list has already
reached 24 hours.
Create clip lists so that the total duration is within 24
hours.
This appears when recording, E-E display, essence
mark recording, or sub clip addition for quick scene
selection is attempted on a disc that needs to be
salvaged.
Try again after salvaging the clips on the disc (see
page 36).
This appears when CNTR SEL on the HOME page of
the function menu is set to "COUNTER", and you try
to preset timecode or user bits.
To use timecode or user bits, set CNTR SEL to "TC"
or "UB" (see page 75).
This appears when TC MODE on page P1 of the
function menu is set to "REGEN", and you try to
preset timecode or user bits.
Set TC MODE to "PRESET" (see page 76).
This appears when RUN MODE on page P1 of the
function menu is set to "REC RUN", and you try to
preset timecode or user bits.
Set RUN MODE to "FREE RUN" (see page 76).
Stop recording and try again.
This appears when you press the SUB CLIP button
while the clip list on the disc is not loaded into the
current clip list.
Load the clip list (see page 56) and try again.
This appears when a playback button is pressed with
no sub clips in the current clip list.
Playback is not possible when there are no sub clips
in the current clip list.
97
Troubleshooting