Sony PDW-F30 Operating Instructions Manual page 82

DISPLAY CONTROL [Display]: Settings related to display
on the LCD panel of this unit and on an external monitor
SUB STATUS [> Sub status]: Select the supplementary
status information shown in the monitor video section and
on an external monitor.
MENU DISPLAY [> Menu DISP]: Select the type of menu
characters shown in the monitor video section and on an
external monitor.
BRIGHTNESS [> Brightness]: Adjust the brightness of the
display.
ALARM [> ALARM]: Select whether to display alarm
messages.
MENU STATUS [> Menu STAT]: Select whether or not to
display menu settings in the monitor video section of the
LCD panel and on an external monitor when DISPLAY
CONTROL >DISPLAY INFO is set to "TIME DATA &
STATUS".
HD CHARA [> HD cha]: Specify whether, when CHAR SEL
on the HOME page of the function menu is set to "ON", to
forcibly turn off superimposition of text information on HD
output.
TIME CODE [Time Code]: Settings related to the timecode
generator
TCG REGEN [> TCG regen]: Select the signals to generate
when the timecode generator is set to regenerate mode
(TC MODE on page P1 of the function menu is set to
"REGEN").
UB BINARY GP. [> Binary Gp.]: Settings related to the user
bits binary group flag.
Note
When TCG on page P1 of the function menu is set to anything
other than "INT", and TC MODE is set to "REGEN", the user
bits binary flag setting of external timecode is followed.
82
System Menu
Description
*OFF [>> OFF]: No supplementary status information
TC MODE [>> TC mode]: Indications of the operating mode of
internal timecode generator
REMAIN [>> Remain]: Free capacity on the disc (in minute
units)
CLIP NO [>> Clp No]: Clip number
PLAYBACK REMAIN [>> PB remain]: Time from the current
playback position to the recording end position, displayed
in time data format
For details of supplementary status information displayed on
the monitor when a setting other than OFF is selected, see
"Displaying Supplementary Status Information" (page 34) in
Chapter 2.
Select while viewing characters on the MENU DISPLAY
screen.
*WHITE (WITH BKGD): White characters on black
background
BLACK (WITH BKGD): Black characters on white background
WHITE/OUTLINE: White characters with black outline
BLACK/OUTLINE: Black characters with white outline
To return to the top level of the setup menu: Press the
MENU button.
The LCD BRIGHTNESS screen appears.
Factory default setting: *55
See page 27 "Adjusting the Brightness of the LCD Panel" for
more information about how to adjust the brightness.
OFF [>> OFF]: In general, do not display alarm messages.
However, do display some important alarm messages.
ON(LIMITED) [>> ON(Limit)]: Display a minimum number of
alarm messages.
*ON [>> ON]: Display all alarm messages.
*DISABLE [>> DISABLE]: Do not display.
ENABLE [>> ENABLE]: Display (only when no disc is loaded
or during disc insertion/ejection).
See "Superimposed Text Information" (page 32) in Chapter 2
for the information that is displayed.
OFF [>>OFF]: Forcibly turn off superimposition of text
information.
*FUNCTION MENU [>>F-MENU]: Do not forcibly turn off
superimposition of text information. (The setting of CHAR
SEL in the function menu takes priority.)
Description
*TC & UB [>> TC & UB]: Regenerate both timecode signals
and user bits signals.
TC [>> TC] :Regenerate timecode signals only.
UB [>> UB]: Regenerate user bits signals only.
*000:NOT SPECIFIED [>> 000]: Character set not specified
001:ISO CHARACTER [>> 001]: 8-bit characters conforming
to ISO 646 and ISO 2022
010:UNASSIGNED-1 [>>010]: Undefined
011:UNASSIGNED-2 [>> 011]: Undefined
100:UNASSIGNED-3 [>> 100]: Undefined
101:PAGE/LINE [>> 101]: Multiplex
110:UNASSIGNED-4 [>> 110]: Undefined
111:UNASSIGNED-5 [>> 111]: Undefined