Additional Bluetooth Control Functions; Connecting Bluetooth To A Garmin Virb - Garmin GMA 350c Pilot's Manual

ADDITIONAL BLUETOOTH CONTROL FUNCTIONS

In addition to the 2 second press and hold of the inner knob discussed
above, the knob has two additional functions that are intended to be
seldom or never used. The following functions are available if needed for
troubleshooting:
Press and hold the inner knob for 5 seconds to turn off the Bluetooth
radio. The aural message "Bluetooth off" is heard. This function
electrically turns off the radio, not just the audio source selection. In
the event that Bluetooth radio interference with communication or
navigation equipment is suspected, the Bluetooth radio can be powered
off without powering off the entire audio panel. A subsequent 5 second
press and hold turns the radio back on.
Press and hold the inner knob for 10 seconds to clear the memory
of paired devices (up to 10 are stored). Once cleared, the aural
message "Bluetooth list cleared" is heard. This function is used as a
troubleshooting method when a device is not pairing, or to remove a
device that is no longer needed.

CONNECTING BLUETOOTH TO A GARMIN VIRB

The GMA 350c supports Bluetooth wireless delivery of pilot headphone
audio to versions of the Garmin VIRB action camera that support Bluetooth
mic audio input for recording.
Pairing a Garmin VIRB to the GMA 350c works like pairing other
Bluetooth audio devices. Once connected, pilot headphone audio will be
delivered to the VIRB via Bluetooth. In a connection to the Garmin VIRB,
the GMA is the source. Therefore, selecting an entertainment button is not
required. The PILOT annunciator turns blue to indicate this connection.
190-01134-12 Rev. K Garmin GMA 350/350c Pilot's Guide
GMA 350/350c Audio Panel
37