Mono/Stereo Headsets; Transceivers; Enabling/Disabling Monitored Com Muting - Garmin GMA 350c Pilot's Manual

MONO/STEREO HEADSETS

Stereo headsets are recommended when using the GMA 350/350c. Using
a monaural headset in a stereo jack shorts the right headset channel output
to ground. While this does not damage the Audio Panel, a person listening
on a monaural headset hears only the left channel in both ears. If a monaural
headset is used at one of the passenger positions, any other passenger using
a stereo headset hears audio in the left ear only.

TRANSCEIVERS

Transceiver functions may also be accessed via Voice Recognition
NOTE:
commands. Refer to the Voice Recognition section for more information.
Audio from the #1 or #2 COM receiver can be selected independently by
pressing the respective Key(s) (COM1 or COM2).
Pressing MIC1 or MIC2 selects the #1 or #2 transmitter and simultaneously
selects the related COM receiver (COM1 or COM2) allowing received
audio to be heard. The other COM receiver can be added by pressing the
respective key. During reception of audio from the COM radio selected for
transmission, audio from the other COM radio is muted.

ENABLING/DISABLING MONITORED COM MUTING

Press and hold COM1 or COM2 to enable/disable monitored COM
muting during reception of audio from the COM radio selected for
transmission. The aural message "Monitor Mute Enabled/Disabled"
is heard.
190-01134-12 Rev. K Garmin GMA 350/350c Pilot's Guide
GMA 350/350c Audio Panel
13