Fujitsu D3488 Technical Description page 71

Mainboard D3488
Removing a memory module
► Push the clips on the right and left of the memory slot outward (1).
► Pull the memory module out of the memory slot (2).
When installing memory, a module may require a considerable amount of force to seat
i
properly, although this is very rare. To avoid bending and damaging your motherboard,
place it on its anti-static bag and onto a flat surface, and then proceed with memory
installation.
You must unplug the power connector to the motherboard before performing system
!
hardware changes, to avoid damaging the board or expansion device.
Fujitsu
English - 27
65