Mainboard D3488
Remove the processor
The following steps only need to be completed when a processor is being replaced, and
i
not with an upgrade when a second processor is fitted.
1
►
Release the processor frame from its locking slots (1).
The processor can be stuck firmly to the heat sink by applying heat-conducting paste
i
between the processor and the heat sink.
►
Carefully move the processor frame forwards and backwards until the processor frame is
detached from the heat sink.
►
Remove the processor frame from the heat sink.
The processor must only be placed on a non-conductive, antistatic surface on its flat side.
!
Never move the processor around on the surface where it was placed.
Fujitsu
1
English - 29
1
1
67