Connecting To The Line 2 In Jacks On The Front Panel - Sony RDR-GX300 Operating Instructions (RDR-GX300 DVD Recorder) Operating Instructions Manual

Connecting to the LINE 2 IN jacks on the front panel

Connect a VCR or similar recording device to the LINE 2 IN jacks of this recorder. If the equipment has
an S-video jack, you can use an S-video cord instead of an audio/video cord.
z Hint
When the connected equipment outputs only monaural sound, use audio cables that distribute monaural sounds to left/
right channels (not supplied).
Notes
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment's input jack with the other equipment's output
jack connected to the input jack of this recorder. Noise (feedback) may result.
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen.
DVD recorder
Be sure to connect your VCR to the DVD recorder and your TV in the order shown below. To watch videotapes, watch
the tapes through a second Line input on your TV.
VCR
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
30
VCR, etc.
S VIDEO
S-video
cord (not
supplied)
to LINE 2 IN
: Signal flow
VCR
LINE IN 1
DVD recorder
OUTPUT
VIDEO AUDIO
L R
Audio/video cord
(not supplied)
S VIDEO VIDEO L (MONO) AUDIO R
TV
TV
LINE IN 2
LINE 2 IN
DVD recorder