Sony RDR-GX300 Operating Instructions (RDR-GX300 DVD Recorder) Operating Instructions Manual page 22

Manufacturer
Sylvania
Teknika
Toshiba
Wards
Yorx
Zenith
Controlling the volume of your AV
amplifier (receiver) with the remote
Number
buttons, SET
1
Slide the TV/DVD switch to DVD.
2
Hold down [/1, and enter the
manufacturer code (see the table below)
for your AV amplifier (receiver) using the
number buttons.
3
Release [/1.
The VOL +/– buttons control the AV
amplifier's volume.
If you want to control the TV's volume, slide
the TV/DVD switch to TV.
z Hint
If you want to control the TV's volume even when the
TV/DVD switch is set to DVD, repeat the steps above
and enter the code number 90 (default).
22
Code number
08, 12
03, 08, 14
07, 18
03, 04, 12
12
14, 15
TV/DVD
switch
"/1
1 2 3
4 5 6
7 8 9
VOL +/–
0
Code numbers of controllable AV amplifiers
(receivers)
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your AV amplifier (receiver).
Manufacturer
Sony
Denon
Kenwood
Onkyo
Pioneer
Sansui
Technics
Yamaha
If you have a Sony DVD player or
more than one Sony DVD recorder
If the supplied remote interferes with your other
Sony DVD recorder or player, set the command
mode number for this recorder and the supplied
remote to one that differs from the other Sony
DVD recorder or player.
The default command mode setting for this
recorder and the supplied remote is DVD3.
1
4
7
SYSTEM
MENU
O RETURN
Code number
78, 79, 80, 91
84, 85, 86
92, 93
81, 82, 83
99
87
97, 98
94, 95, 96
2 3
5 6
8 9
0
M/m,
ENTER
COMMAND
MODE