Set Top Box Control - Sony RDR-GX300 Operating Instructions (RDR-GX300 DVD Recorder) Operating Instructions Manual

Set Top Box Control

You can control your cable box/satellite receiver
using the supplied set top box controller. See
"Step 7: Easy Setup" for details.
Set Top Box Control
On Turns on the cable box/satellite
receiver control function. See
"Using the cable box/satellite
receiver control function"
(page 12).
Off
Turns off the cable box/satellite
receiver control function. Select
this if you do not want to use the
supplied set top box controller.
When "Set Top Box Control" is set to "On," you
can make the following settings. Note that when
you change "Set Top Box Control" to "On" or
"Off," all of the timer recording settings will be
canceled.
Brand Code
See "Cable Box/Satellite Receiver Brand Code"
(page 96) for the brand code for your cable box or
satellite receiver, and enter the code using the
number buttons and ENTER.
Connection
Selects the connection you used for your cable box
or satellite receiver. When the cable box or
satellite receiver is connected to the recorder's
LINE IN jacks, select the connection from
"Line1," "Line2," or "Line3." When the cable box
or satellite receiver is connected to the recorder's
VHF/UHF IN jack, select the output channel,
"Ch2," "Ch3," or "Ch4."
Ch. digit lock
Allows you to select whether to fix the digits for
your cable box or satellite receiver.
Off Select this when your cable box or
satellite receiver only accepts a
three or more digit channel
number. Normally select this.
Lock to Select this only when your cable
two digits
box or satellite receiver only
accepts a two digit channel
number.
Mode for SET button
Select "Mode 1" or "Mode 2" if your cable box or
satellite receiver requires pressing an ENTER
button or a SET button etc., after entering the
channel number. If "Mode 1" does not work, try
"Mode 2." If your cable box or satellite receiver
does not respond to either setting, contact the
manufacturer of the cable box or satellite receiver.
Off No code is sent when SET is
pressed. Normally select this.
Mode 1
Sends the channel number you
entered.
Mode 2
Sends the channel number you
entered.
Language
OSD (On-Screen Display)
Switches the display language on the screen.
DVD Menu (DVD VIDEO only)
Switches the language for the DVD menu.
Audio (DVD VIDEO only)
Switches the language of the sound track.
When you select "Original," the language given
priority in the disc is selected.
Subtitle (DVD VIDEO only)
Switches the language of the subtitles recorded on
the disc.
When you select "Audio Follow," the subtitle
language changes according to the language you
selected for the sound track.
z Hint
If you select "Others" in "DVD Menu," "Subtitle," or
"Audio," select and enter a language code from
"Language Code List" (page 95) using the number
buttons.
Note
If you select a language in "DVD Menu," "Subtitle," or
"Audio" that is not recorded on the DVD VIDEO, one of
the recorded languages will be automatically selected.
73