Connecting To The Line 2 In Jacks On The Front Panel - Sony RDR-GX330 Operating Instructions Manual

Notes
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals through a VCR, you may not receive a clear image on yeur TV screen.
DVD recorder VCR _ TV ]
Be sure te connect your VCR to the DVD recerder and to your TV in the order shown belong. Te watch
vide() tapes, watch the tapes through a second line input on your TV.
Line input 1
I vc,
DVDrecorder
TV I
I t Lineinput2
• If you discennect the recorder's AC power cord, you will nol be able to view the signals from the
connected VCR.
=_
¢D
Connect a VCR or similar recording device Io Ihc LINE 2 1N jacks of Ihis recorder, lflhe
equipment has an S-video jack. you can use an S-video cord ieslead ol an audio/video cord.
VCR, etc,
Q.
m
S-video cord ,o
(not supplied)
to LINE 2 IN
_ Audio/video cord
i_Jl_n ot supplied)
DVD recorder
IE7->'%, : Signal flow
"_° Hint
When the connected equipment outputs only monaural sound, connect te just the LIMONO) and VIDEO
input jacks on the frent of Ihe recerder. De not connect the R input jack.
Notes
• Do net connect the yellow LINE IN IVIDEO) jack when using an S-video cord.
• Do not cennect the output jack ef this recorder te another equipment's input jack with the ether
equipmenCs eutput jack connected to the input jack of this recerder. This may cause noise (li:edback).
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
25