Sony RDR-GX300 Operating Instructions (RDR-GX300 DVD Recorder) Operating Instructions Manual page 79

4
Select a geographic area as the playback
limitation level, and press ENTER.
The area is selected.
When you select "Others," press the number
buttons to select and enter an area code in the
table (see below). Then select "OK" and press
ENTER.
5
Select "Level," and press ENTER.
The selection items for "Level" are displayed.
Features - Parental Control
Level : Off
Standard : Others
Password
The lower the value, the stricter the limitation.
6
Select the level, and press ENTER.
The Parental Control setting is complete.
• To cancel the Parental Control setting for the
disc, set "Level" to "Off" in step 6.
• To change the password, select "Password"
in step 3, and press ENTER. When the
display for registering a password appears,
enter a new four-digit password using the
number buttons, then select "OK" and press
ENTER.
Notes
• If you forget your password, you will have to reset it by
selecting "Parental Control" under "Factory Setup" in
Options Setup (page 80).
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
recorder.
• Depending on the disc, you may be asked to change the
Parental Control level while playing the disc. In this
case, enter your password, then change the level.
Off
8
7
6
5
4
Area code
Standard Code number
Argentina 2044
Australia 2047
Austria 2046
Belgium 2057
Brazil 2070
Canada 2079
Chile 2090
China 2092
Denmark 2115
Finland 2165
France 2174
Germany 2109
India 2248
Indonesia 2238
Italy 2254
Japan 2276
Korea 2304
Malaysia 2363
Mexico 2362
Netherlands 2376
New Zealand 2390
Norway 2379
Pakistan 2427
Philippines 2424
Portugal 2436
Russia 2489
Singapore 2501
Spain 2149
Sweden 2499
Switzerland 2086
Thailand 2528
United Kingdom 2184
79