Sony RDR-GX300 Operating Instructions (RDR-GX300 DVD Recorder) Operating Instructions Manual page 77

Dvd players & recorders: dvd recorder
Hide thumbs Also See for RDR-GX300 Operating Instructions (RDR-GX300 DVD Recorder):
Table of Contents

Advertisement

Dolby
Normally select this
Surround
position.
Multi-channel audio signals
are output to two channels
for enjoying surround
sounds.
Normal
Multi-channel audio signals
are downmixed to two
channels for use with your
stereo.
Digital Out
Selects if audio signals are output via the
DIGITAL OUT (OPTICAL or COAXIAL) jacks.
On
Normally select this
position. When you select
"On," see "To set the digital
output signal" for further
settings.
Off
The influence of the digital
circuit upon the analog
circuit is minimal.
To set the digital output signal
The following setup items switch the method of
outputting audio signals when you connect a
component such as an amplifier (receiver) with a
digital input jack.
For connection details, see "Connecting the Audio
Cords" (page 18).
Select "Dolby Digital" and "DTS" after setting
"Digital Out" to "On."
SETUP
Settings
Auto Stereo :
Video
Tuner Audio :
Audio
Audio ATT :
Features
Audio DRC :
Options
Downmix :
Digital Out :
Easy Setup
Dolby Digital :
DTS :
On
Main
Off
Standard
Dolby Surround
On
D-PCM
Off
If you connect a component that does not accept
the selected audio signal, a loud noise (or no
sound) will come out from the speakers, and may
affect your ears or cause speaker damage.
• Dolby Digital (DVDs only)
Selects the type of Dolby Digital signal.
D-PCM
Select this when the recorder
is connected to an audio
component lacking a built-in
Dolby Digital decoder. You
can select whether the
signals conform to Dolby
Surround (Pro Logic) or not
by making adjustments to
the "Downmix" item in
Audio Setup (page 76).
Dolby
Select this when the recorder
Digital
is connected to an audio
component with a built-in
Dolby Digital decoder.
• DTS (DVD VIDEO only)
Selects whether or not to output DTS signals.
On
Select this when the recorder
is connected to an audio
component with a built-in
DTS decoder.
Off
Select this when the recorder
is connected to an audio
component without a built-in
DTS decoder.
77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-8800dp

Table of Contents