Sony RDR-GX300 Operating Instructions (RDR-GX300 DVD Recorder) Operating Instructions Manual page 46

Changing the priority of overlapped
settings
If the timer settings overlap, the program that was
set last has priority and will be recorded. A timer
recording of lower priority may be canceled, start
from the middle or stop midway through the
program.
You can change the priority of a program if
necessary.
When the timer settings overlap
The program set last has priority.
Example: You set the timer in order of A, B, and
C (setting C has first priority)
7:00
A
9:00
Actual recording
A
7:00
If you give setting B priority over setting C, all of
program B will be recorded and program C is
recorded only after program B has ended.
A
7:00
If the end time of one recording and the start
time of another are the same
The end of program A will be cut.
7:00
A
46
will be cut off
11:00
B
10:30
C
B C
9:00 10:30
B C
9:00 11:00
9:00 10:00
B
1
Press SYSTEM MENU.
The System Menu appears.
2
Select "TIMER LIST," and press ENTER.
TIMER LIST
Mon 10/25 8:30PM - 9:30PM
Mon-Sat 10:00AM - 10:30AM 25ch
Fri 10/29 9:00AM - 10:15AM 3ch
Sat 10/30 4:00PM - 5:00PM
3
Select an overlapped timer setting, and
press ENTER.
indicates that the timer setting is
overlapped by another timer setting.
4
Select "Check Overlap," and press ENTER.
Check Overlap
These timer settings overlap.
Mon-Sat 10:00AM - 10:30AM
Fri 10/29 9:00AM - 10:15AM
Change
5
Select "Change," and press ENTER.
Change priority
Fri 10/29 9:00AM - 10:15AM
Where do you want to move this timer setting?
Mon-Sat 10:00AM - 10:30AM
6
Press M/m to change the timer setting's
priority, and press ENTER.
The setting moves to its new location in the
list. A timer setting higher up in the list has
higher priority.
To return to the Timer List, select "Cancel."
z Hint
You can change the priority of a timer setting while
recording.
10:30 PM
4ch HQ
SP
SLP
125ch SLP
25ch SP
3ch SLP
Close
Cancel
3ch SLP
25ch SP