Using an ACL to Further Select
Traffic
Optional
•
To use an ACL to select traffic arriving on an interface, enter:
ProCurve_source_switch(config)#
monitor ip access-group <acl_name> in mirror <1-4> [mirror
<1-4> . . .]
ProCurve_source_switch(config)#
access-group <acl_name> in mirror <1-4> [mirror <1-4> . . .]
Replace <acl_name> with the name of the ACL you have configured.
–
interface <port/trunk/mesh>
vlan <vlan-ID> monitor ip
14