Configuring The Destination Switch - HP ProCurve 6200yl Software Update Npi Technical Training
Hide thumbs
Also See for ProCurve 6200yl:
- Access security manual (390 pages) ,
- Multicast and routing manual (308 pages) ,
- Reference manual (765 pages)
Table of Contents
Advertisement
Configuring the Destination
Switch
1. For remote traffic mirroring, configure the source and destination of
the mirror session on the destination switch
ProCurve_dst_switch(config)#
<src-udp-port> <dst-ip-add> port <port#>
These settings
must match the
settings you will
configure on the
source switch.
mirror endpoint ip <src-ip-add>
<src-ip-add>
IP address of the VLAN or subnet on which the
mirrored traffic enters or leaves the source
switch
<src-udp-port>
The unique UDP port number to use for the
session
<dst-ip-add>
IP address of the VLAN or subnet for the exit
port on the destination switch
<port#>
Exit port on the destination switch
Options
9
Advertisement
Table of Contents
Need help?
Do you have a question about the ProCurve 6200yl and is the answer not in the manual?
Questions and answers