HP ProCurve 6200yl Software Update Npi Technical Training page 12

Configuring the Source Switch
Define the originating interface
• Define the originating interface as a port, trunk, or mesh port
ProCurve_source_switch(config)#
monitor all [in | out | both] mirror <1-4> [mirror <1-4> . . .]
<port/trunk/mesh>
[in | out | both]
<1-4>
interface <port/trunk/mesh>
Options
Port, trunk, or mesh
Direction of traffic that you want mirrored:
in = traffic entering port
out = traffic exiting port
both = all traffic
Number for this mirror session
12