Servicing; Annual Servicing; Changing Components - Benchmark BoilerMate BMA 125 OV Design, Installation And Servicing Instructions

A-class, an open vented central heating and mains pressure hot water supply system incorporating a thermal store

Table of Contents

3.0 SERVICING

No annual servicing of the BoilerMate A-Class

is necessary.

However, if required, the operation of the

controls and a hot water performance test can

be carried out when servicing the boiler to

prove the appliance is working satisfactorily

and within its speciﬁ cation.

3.2 CHANGING

COMPONENTS

Free of charge replacements for any faulty

components are available from Gledhill during

the in-warranty period (normally 12 months).

After this, spares should be obtained direct

from Gledhill using the 'Speed Spares' service, or

through any of the larger plumbers merchants/

specialist heating spares suppliers.

Help and advice is also available from the

Technical Helpline on 08449 310000.

However, all components are readily accessible

and can be changed quickly and easily by the

installer using common plumbing practice.

Note:

The pump is a Grundfos UPR 4 wire type and

any replacement must be the same model,

obtained direct from Gledhill. Failure to do

this will affect the hot water performance.

This type of pump is also available as an option

for the boiler and heating pumps. Be sure to

check this and replace on a like for like basis.

Page 34

Table of Contents