Specifications - Sony DVP-S525D Operating Instructions Manual

Sony operating instructions cd/dvd player dvp-s525d
Hide thumbs Also See for DVP-S525D:
Table of Contents

Advertisement

Specifications

CD/DVD player
Laser
Semiconductor laser
Signal format system
PAL/(NTSC)
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1
dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5
dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 110 dB (LINE OUT (AUDIO)
connectors only)
Harmonic distortion
Less than 0.0025%
Dynamic range
More than 100 dB (DVD)
More than 98 dB (CD)
Wow and flutter
Less than detected value
(±0.001% W PEAK)
Outputs and inputs
Jack
Output
type
level
Phono
2 Vrms
LINE OUT
jacks
(at 50 kilohms)
(AUDIO)
DIGITAL OUT
Optical
–18 dBm
(OPTICAL)
output
connector
Phono
0.5 Vp-p
DIGITAL OUT
jack
(COAXIAL)
Phono
1.0 Vp-p
LINE OUT
(VIDEO)
jacks
4-pin
Y: 1.0 Vp-p
S VIDEO OUT
mini DIN
C: 0.3 Vp-p
(PAL)
0.286 Vp-p
(NTSC)
PHONES
Phone
12 mW
jack
Phono
2 Vrms
5.1CH
jacks
(at 50 kilohms)
OUTPUT
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Supplied accessories
See page 7.
* The signals from LINE OUT (AUDIO) connectors and 5.1 ch L,R
connectors are measured. When you play the PCM sound tracks
with 96 kHz sampling frequency, the output signals from the
DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz
(sampling frequency).
Design and specifications are subject to change without notice.
Load impedance
Over 10 kilohms
Wave length: 660 nm
75 ohms terminated
75 ohms,
sync negative
75 ohms,
sync negative
75 ohms terminated
32 ohms
Over 10 kilohms
220 – 240 V AC, 50/60 Hz
17 W
430 95
305 mm (w/h/d)
incl. projecting parts
3.4 kg
5 ˚C to 35 ˚C
5 % to 90 %
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents