Sony DVP-S525D Operating Instructions Manual page 58

Troubleshooting
The numbers or letters of 5 characters are
displayed on the front panel display.
/ Self-diagnosis function was activated. See the
table in page 60 and treat the player appropriately.
The picture is black and white.
/ In the setup display, set "EURO AV OUT" in
"CUSTOM SETUP" to the appropriate item
conforms to your TV (page 48).
/ Depending on the TV, the picture on the screen
becomes black and white when you play a disc
recorded in NTSC color system.
Sound
There is no sound.
/ Check that the player is connected securely.
/ The audio connecting cord is damaged. Replace it
with a new one.
/ Make sure you connect the player to the audio
input connectors on the receiver (amplifier) (page
11).
/ Make sure you turn on the TV and the receiver
(amplifier).
/ Make sure you select the appropriate position on
the receiver (amplifier) so that you can listen to the
sound from the player.
/ The player is in pause mode or in Slow-motion
Play mode. Press · to return to normal play
mode.
/ Fast forward (1) or 2)) or fast reverse (10
or 20) is performed.
normal play mode.
/ Check the speaker connections and settings (page
14, 53). Refer to the operating manual of your
receiver (amplifier).
/ When you play the Dolby Digital/MPEG AUDIO
sound tracks and attempt to output from the
DIGITAL OUT connectors, set "DIGITAL OUT" to
"ON" in the setup display. Otherwise no sound
will come out from the DIGITAL OUT connectors
(page 51).
/ When you play the DTS sound tracks, no sound
will come out from the LINE OUT (AUDIO),
5.1CH OUTPUT and PHONES connectors (page
52).
Sound noise is heard.
/ Clean the disc.
/ When you play the DTS sound tracks on a CD,
sound noise will come out from the LINE OUT
(AUDIO), 5.1CH OUTPUT and PHONES
connectors (page 52).
58
Press · to return to
Sound distortion occurs.
/ In the setup display, set "AUDIO ATT" in "AUDIO
SETUP" to "ON" (page 51).
The sound loses stereo effect when you play a
VIDEO CD or a CD.
/ Set "AUDIO" to "STEREO" in the Control Menu
display (page 31).
/ Make sure you connect the player appropriately
(page 8, 11, 14).
The surround effect is difficult to hear when you
are playing a Dolby Digital sound track.
/ Check the speaker connections and settings (page
14, 53). Refer to the operating manual of your
receiver (amplifier).
/ Depending on the DVD, the output signal may not
be the entire 5.1 channel but monaural or stereo
even if the sound track is recorded in Dolby Digital
format.
The sound comes from the center speaker only.
/ Depending on the disc, the sound may come from
the center speaker only.
/ Set "VES" to "OFF," "VES A" or "VES B" in the
Control Menu display (page 34).
The sound comes from the front speaker only.
/ You set "VES" to "VES A" or "VES B" in the
Control Menu display when you have connected
the rear speakers (page 34). Select the other item.
Operation
The remote does not function.
/ Remove any obstacles between the remote and the
player.
/ Use the remote near the player.
/ Point the remote at the remote sensor g on the
player.
/ Replace all the batteries in the remote with new
ones if they are weak.
The disc does not play.
/ There is no disc inside ("Insert disc." appears on
the TV screen).
Insert a disc.
/ Insert the disc correctly with the playback side
facing down on the disc tray.
/ Clean the disc.
/ The player cannot play CD-ROMs, etc. (page 5).
Insert a DVD, a VIDEO CD, or a CD.
/ Check the region code of the DVD (page 4).