Table of Contents
Advertisement
3.1) General Characteristics:
Application range
support arm ignition control
dimensions
weight
Cutting group
n° of revs of drive shaft
drive shaft diameter
max. diameter of cutting disc
max. cutting depth
Combustion engine
type
displacement
bore / stroke
power
n° of revs idling
tank capacity
carburettor
spark plug
fuel
clutch
start
(1)
Acoustic noise
Vibration
(2)
* If necessary it is possible to use abrasive discs with a 7/8 "(22.2 mm) fi xing hole (ref. to § 3.3.1 for details).
(1)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
L
= weighted continuous acoustic pressure level equivalent.
pA
L
= maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L
= acoustic power level emitted by the machine.
WA
(2)
Directive 2006/42/EC, annexe 1, point 2.2.1.1
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISOS 5349-1/2 Standard, and
under operating conditions much more severe than those normally found.
Rail saw is designed to cut rail with suitable abrasive disc
kg (lbs)
RPM
mm (inch)
mm (inch)
mm (inch)
Husqvarna, 2 stroke, single-cylinder, air cooled,
3
cm
(cu.inch)
mm (inch)
kW (HP)
RPM
litres (US Pint)
CHAMPION RCJ6Y, NGK BPMR7A or equivalents
dB
L
m/s
2
RDS-20P
NO
refer to Fig. 2 , page 31
18 (39.6)
4700
25,4 (1) *
406 (16)
140
electronic start, 5-stage air fi lter
119 (7.26)
60 mm (2.36) / 42 mm (1.65)
5,8 (7.8)
min. 2700 - max. 9300 ± 150
1,25 (2.65)
Walbro WG 9
petrol mixture
centrifugal with automatic intervention
by cord pull with automatic rewind
105,5 (A)
L
121,3 (C)
pA
pCPeak
11,42 max.
RDSC-20P
YES
L
116 (A)
WA
6
Advertisement
Table of Contents
