insys icom Powerline GP Manual page 48

Function
9.3.2.5 D_LINK_TERMINATE
Terminates a current SLAC Association. If Resetup is yes, the device will listen
again for SLAC requests. If Resetup is no, the device will remain in Unmatched
state.
Prerequisite: System State is Matched or Unmatched
Field
Dest. MAC
Source MAC
Ethertype
Reserved
Type
Request
AttenRxEVSE
Table 14: D_LINK_TERMINATE.REQ message
Confirmation of D_LINK_TERMINATE.REQ
Result is a failure if System State is Unoccupied.
Field
Dest. MAC
Source MAC
Ethertype
Reserved
Type
Previous req.
Status
Table 15: D_LINK_TERMINATE.CNF message
48
Field size Definition
(octets)
6 Powerline GP MAC
6 HLE MAC
2 Ethertype = 0xabba
1 Reserved = 0x00
2 D_LINK_TERMINATE.REQ Type = 0x0b07
1 0x00 = Resetup yes, 0x01 = Resetup no
58 Rx attenuation of the charging station (see AttenRxEVSE)
Field size Definition
(octets)
6 HLE MAC
6 Powerline GP MAC
2 Ethertype = 0xabba
1 Reserved = 0x00
2 D_LINK_TERMINATE.CNF Type = 0x0b08
1 Request type of the previously received HC_ATTEN_CALC_RE-
SULT.IND message
0x00 = Resetup yes, 0x01 = Resetup no
1 0x00 = failure, 0x01 = success
INSYS Powerline GP