SMA S Technical Description page 94

Activating and Deactivating the Backup System
Stopping the Backup System with the Sunny Remote Control 1
Set the Sunny Backup 2200 to standby mode using the external display.
Proceed as follows:
1. Push and hold the button on the Sunny Remote
Control 1.
The following message appears.
2. Hold the button down until the bars indicating the
remaining time of the stopping process are gone.
3. The screen changes.
4. Release the button.
5. The Sunny Backup 2200 stops running.
DANGER!
Danger to life due to high voltages.
The Sunny Backup System S is in "Standby" mode! Voltage is still present in the Sunny
Backup 2200 (both DC and AC sides).
• Turn off the Sunny Backup 2200.
• Disconnect the Sunny Backup 2200 from any voltage sources.
Operating consumption
Even in standby mode, the Sunny Backup 2200 still requires about 4 W of power from the
battery.
94 SBU2200-TEN083320
SMA Solar Technology AG
Technical Description