SMA S Technical Description page 113

SMA Solar Technology AG
The files on the MMC/SD card have the following meanings:
File name
evthism.log (evthisN.log for SlaveN)
failhism.log (failhisN.log for SlaveN)
si030607.evt
si030607.log
sipar1.lst
sipar2.lst
update.bin
Information
The "BOOTEX.LOG" file is not necessarily on the card. It is created depending on the
operating system used (e.g. WindowsXP or Windows2000).
The firmware of the Sunny Backup 2200 expects device-specific data in the main directory of the
MMC/SD card. This data includes a new firmware version, parameters and measuring data. The
firmware ignores non-device-specific data in the main directory.
The Sunny Backup 2200 uses the MMC/SD card in the Sunny Remote Control 1 to save and load
device parameters.
The Sunny Backup 2200 supports the acquisition of measured data on the MMC/SD card. It saves
this data in a special file. This contains, among other things, a header, time stamp, date and data type.
There are three types of log data:
• Measured data (are saved cyclically)
• Events and errors (are only saved when they occur)
The Sunny Island 2200 supports the acquisition of measured data from the following areas:
• Battery
• Inverters
• System
• External source
• Loads
Technical Description
Storing Data on an MMC/SD Card
Meaning
event history of the device, saved by means of
parameter "550.01 CardFunc", option StoEvtHis
failure history of the device, saved by means of
parameter "550.01 CardFunc", option StoFailHis
event/failure history for the day (format
DDMMYY)
data archive for the day (format DDMMYY)
parameter list of the device, created by means of
parameter "550.02 ParaSto", option Set1
parameter list of the device, created by means of
parameter "550.02 ParaSto", option Set2
software for the device
SBU2200-TEN083320 113