SMA S Technical Description page 89

SMA Solar Technology AG
9. Press the button and confirm or cancel.
(Confirm: Y(es), cancel: N(o))
10. After confirming, the Sunny Backup 2200 is in
standby mode.
The inverter LED and the battery LED illuminate
yellow.
11. The Sunny Backup 2200 now creates a daily file
and writes it on the MMC/SD card.
12. Once the file has been saved, the Sunny Backup
2200 can be started by pressing and holding the
button. A bar, which decreases in length, will
appear on the display during this process. The
inverter LED changes its color from yellow to green.
13. The Sunny Backup 2200 starts (an acoustic signal
is emitted). After the Sunny Backup 2200 has
connected to the grid, the color of the grid LED
changes from yellow to green.
Error messages
If the device unexpectedly displays an error, it must be remedied before the device can be
operated. For this purpose, refer to section 21 „Troubleshooting/Problem Solving" (152).
Technical Description
(First) Commissioning
SBU2200-TEN083320 89