Internet Portal - Bush FVPZAPPER100 Instruction Manual

Advanced features
Getting the most from your set-top-box
For best home network streaming with this box, the Nero
software should be installed.
Nero MediaHome Installation
To install Nero MediaHome, please proceed as follows:
Note: The Audio Video Sharing feature cannot be used if
the server programme is not installed onto your PC or if
the required media server software is not installed onto
the companion device.
1. Enter the link below completely in the adress-bar of
your web browser.
http://www.nero.com/mediahome-tv
2. Click the Download button on the opening page. The
installation file will be downloaded onto your PC.
3. After the download is completed, double click on the
installation file to start the installation. The installation
wizard will guide you through the installation process.
4. The prerequisites screen will be displayed first. The
installation wizard checks the availability of required
third-party software on your PC. If applications are
missing they are listed and must be installed before
continuing installation.
5. Click the Install button. The integrated serial will be
displayed. Please do not change the displayed serial.
6. Click the Next button. The License Conditions (EULA)
screen will be displayed. Please read the license
agreement carefully and select the appropriate check
box if you agree to the terms of the agreement.
Installation is not possible without this agreement.
7. Click the Next button. On the next screen you can set
your installation preferences.
8. Click the Install button. The installation begins and
finishes automatically. A progress bar will indicate the
state of the installation process.
9. Click the Finish button. The installation is completed.
You will be directed to the web site of the nero
software.
10. A shortcut is now placed on your desktop.
Congratulations! You successfully installed Nero
MediaHome on your PC.
Run Nero MediaHome by double clicking on the shortcut
icon.
If you require any technical guidance or find that your set-top box is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
28 Advanced features

Internet Portal

HINT: A broadband internet connection is required
for high quality viewing. You must set the country
option accordingly in the First Time Installation for
proper operation of the internet portal.
Portal feature adds your box a feature that allows you to
connect a server on the Internet and view the content
provided by this server over your Internet connection.
Portal feature allows you to view the music, video, clip
or web content with defined short-cuts. Whether you
can view this content without interruption depends on
the connection speed provided by your internet service
provider.
Press the button on your remote control to open
internet portal page. You will see icons of the available
applications and services on the portal screen. Use the
directional buttons on your remote to select the desired
one. You may view the desired content by pressing OK
after selecting. Press Back/Return button to return back
to the previous screen.
Moreover, you can access some features using the short-
cut feature defined for the coloured or numeric buttons
of your remote.
Press the Exit button to quit the Internet portal mode.
PIP Window (depending on portal service)
Current source content will be displayed in the PIP
window, if you switch to portal mode while on any active
source.
If you switch to portal mode while watching box channels,
current programme will be displayed in the PIP window.
Notes:
Possible application dependent problems may be caused
by the content service provider.
Portal service content and the interface may be changed
at any time without prior notice.
Third party internet services may change, be discontinued
or restricted at any time.