Trademark Acknowledgment Power Connection Power On-Off Product support Antenna Connection Trouble Shooting USB Connection Help and assistance USB Disk Connection Your Bush Guarantee First Time Installation Standard features Menu System Settings Installation OSD message Channel Navigation Channel List Advanced features...
Safety information Important - Please read these instructions fully before installing or operating Safety Precautions • If any solid object or liquid falls into the cabinet, unplug the apparatus and have it checked by a qualified Power Source personnel before operating it any further. • Always use the provided AC adaptor.
Safety information Important - Please read these instructions fully before installing or operating Markings on the Product The following symbols are used on the product as a marker for restrictions and precautions and safety instructions. Each explanation shall be considered where the product bears related marking only.
Getting to know your set-top box You’ll be up and running in no time Ready? Let’s begin... Features Please read these instructions carefully. They contain • DVB Teletext important information which will help you get the best • Channel capacity: 400 from your set-top box and ensure safe and correct • DVB 7 days event information (7 days EPG) installation and operation.
Getting to know your set-top box You’ll be up and running in no time Overview of the Remote Control 1. Standby: Switches On / Off the box 2. Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen 3.
Getting to know your set-top box You’ll be up and running in no time Connections FRONT VIEW FVPZAPPER100 1. On / Off 2. Channel Down 3. Channel UP 4. USB INPUT: To connect USB storage devices for media playback BACK VIEW...
Connections Bringing it all together Remote Control First open the battery cover on the underside of the remote control. Put in both batteries 1.5Volt (RO3/AAA) referring to the imprinted symbols (+/-) in the battery case and put on the battery cover again. While using the remote control, direct it towards the front side of the receiver.
Connections Bringing it all together Power Connection IMPORTANT: This set top box is designed to operate on 12V DC. For this, an adaptor is used which gives 12 V voltage. Connect this adaptor to a system that supplies 220-240 V AC, 50/60Hz. After unpacking, allow the set-top box to reach the ambient room temperature before you connect the set to the mains.
Connections Bringing it all together USB Connection First Time Installation You can connect a USB hard disk drive or USB memory When turned on for the first time, the language selection stick to your box by using the USB input. This feature screen is displayed.
Page 18
Connections Bringing it all together Freeview Play Platform Freeview Play platform provides catch-up TV and On Demand services. Simply press the Freeview Play button on your remote control to connect to the Freeview Play platform. The Freeview Play platform can also be accessed from the main menu or internet portal.
Standard features Simple everyday use Menu System Output Settings: TV type: It is 16:9 by default. Press the MENU button to access the main menu. Prefer Dolby Digital: Enable Dolby Digital by setting You can move between menus by using the directional ( as Yes.
Standard features Simple everyday use Channel Navigation Options menu and select Add/Remove Favourites option. Press the OK button again. Set the desired list Channel Buttons: Pressing Programme +/- buttons will option to On. The selected channel/s will be added to swich to the next or previous channel in the list.
Advanced features Getting the most from your set-top-box Recording a Programme Instant Recording IMPOR TANT: When using a new USB hard disk Press Record button to start recording an event instantly drive, it is recommended that you first format the while watching a programme.
Advanced features Getting the most from your set-top-box Software Update To configure wired settings please refer to the Network/ Internet Settings section in the Settings Menu. Your box is capable of finding and updating the firmware • You might be able to connect your box to your LAN automatically via the broadcast signal or via Internet.
Advanced features Getting the most from your set-top-box If the selected network is protected with a password, please enter the correct key by using the virtual keyboard. B r o a d b a n d I S P You can use this keyboard via the directional buttons and connection the OK button on the remote control.
Advanced features Getting the most from your set-top-box 1. Nero Media Home Installation Connection is Slow See the instruction book of your wireless modem to The Audio Video Sharing feature cannot be used if the get information on the internal service area, connection server programme is not installed onto your PC or if the speed, signal quality and other settings.
Advanced features Getting the most from your set-top-box Internet Portal For best home network streaming with this box, the Nero software should be installed. HINT: A broadband internet connection is required Nero MediaHome Installation for high quality viewing. You must set the country option accordingly in the First Time Installation for To install Nero MediaHome, please proceed as follows: proper operation of the internet portal.
Advanced features Getting the most from your set-top-box Freeview Play Platform You can also use the Opera menu options to manage the browser. Highlight the Opera- button and press the OK Note: Before attempting to connect to the Freeview Play button to see available page specific and general options.
Other information Helpful technical information Specification GENERAL Power supply for set-top box 12V DC - 220 - 240 V AC, 50-60Hz Input Frequency 470 MHz - 854 MHz Power consumption 12 W (max) Active antenna output 5V - 50mA Operating temperature 5ºC to +40ºC Storage temperature -20ºC to +70ºC...
Product support EN: Hereby, VESTEL Elektronik Sanayi ve Ticaret A.Ş., declares that the radio equipment type TFT IDTV is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: doc.vosshub.com...
Product support Help is always at hand Trouble Shooting Trouble Possible Reasons What To Do Adaptor cable is not The standby led is not lit. Check if the adaptor cable is plugged into the power socket. connected. No picture or sound. No signal or weak signal.
Product support Help is always at hand Help and assistance If you require any technical guidance or find that your set-top box is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105*.
Call us now and activate your 12 month guarantee Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months. Don’t forget to register it with us today so we can provide you with our best possible after- sales service and useful updates.
Page 40
Product support Help is always at hand or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105. Product support...
Need help?
Do you have a question about the FVPZAPPER100 and is the answer not in the manual?
Questions and answers