Battery Operation - Inserting The Batteries Into The Device; Mains Operation - Connecting The Mains Cable; Radio Reception; Setting Up The Device - Silvercrest SPSS 125 A1 Operating Instructions Manual

8.3. Battery operation – inserting the batteries into
the device
 The battery compartment is located at the rear of the device.
 Release both latches and remove the battery compartment cover.
 Insert eight 1.5 V R20/LR20/D batteries (not supplied) with the negative ends on the
springs. Refer to the diagram in the battery compartment!
 Replace the battery compartment cover.
 The device is battery-operated if no power cord is connected to the AC~ socket.
 The device is now in standby mode.
WARNING!
Risk of explosion if batteries are replaced incorrectly.
 Replace batteries only with the same or equivalent type.
8.4. Mains operation – connecting the mains cable
 Connect the supplied power cord to AC the device AC~ socket.
 Plug the mains adapter plug into an easily accessible mains outlet.
The device is mains-operated even if batteries are inserted at the same time.

8.5. Radio reception

The top of the main device is fitted with a telescopic aerial. Fully extend the aerial and ad-
just it for optimum FM radio reception.

8.6. Setting up the device

• Place the device on a sturdy, level surface. Some aggressive varnishes can corrode the
rubber feet on the device. If necessary, place the device on a suitable underlay.
• Upon delivery there is a protective transport insert in the CD compartment. Remove this
cardboard.
Before connecting to an external device, unplug the device's mains plug!
English -21