Switching On The Device/Standby; Audio Functions; Volume/Mute; Equalizer - Silvercrest SPSS 125 A1 Operating Instructions Manual

12. Switching on the device/standby

 Press the
button to switch on the device. The display lights up.
 Press the
button again to switch the device back into standby mode and only the
red standby LED lights up.

13. Audio functions

13.1. Volume/mute

 To adjust the volume, use the VOL/ buttons on the remote control or the dial on
the device.
 Press MUTE to switch off the sound. Press the button again to cancel the mute setting.

13.2. Equalizer

 Press the EQ button once or multiple times to call up the various sound presets: flat,
classic, rock, pop and jazz.

14. Effect lighting

The device speakers can be lit up in various colours.
 Press the LIGHT button once or several times and the respective active lighting pro-
gramme is briefly shown on the display. In effect LIGHT 08, the colours change au-
tomatically.
 If the LIGHT button is pressed again once the last lighting effect has been selected,
the lighting switches off.

15. Radio

 Press the SOURCE button once or several times to switch to radio mode (Tuner). The
display indicates FM and the current frequency.

15.1. Tuning the stations

 Press the TUN-/+ button briefly to set the frequency in 0.05 MHz intervals.
Hold down one of the buttons to automatically search for the next station.
English -23