Overview - Connections; How To Use; Operation; Selecting The Type Of Connection - Silvercrest SSB 50 A1 Operating Instructions Manual

5.3 Overview - Connections

CAUTION: make sure that the soundbar and the devices
to be connected are switched off before you connect them.
Please also read the user instructions for the devices which
you are connecting.
NOTES:
• An HDMI (ARC) cable for the HDMI (ARC) 10 input and
a 3.5 mm stereo jack cable for the LINE IN 7 input are
not included in the items supplied.
• The HDMI (ARC) 10 connection is only able to func-
tion if all components are ARC-enabled. If necessary,
old HDMI cables must be replaced with new ARC-ena-
bled ones.
Input Use
Connection with ste-
reo cinch cable 13,
AUX IN 8
e.g. television set,
CD player
Connection with
3.5 mm stereo jack
LINE IN 7
cable, e.g. MP3
player, telephone
Connection with
HDMI (ARC) cable,
HDMI e.g. to the HDMI
(ARC) 10 ARC connection of
the television set,
DVD player
Connection with
OPTICAL TOSLINK cable 14,
IN 9 e.g. to digital receiv-
er, DVD player
Radio connection,
®
Bluetooth
e.g. smartphone
• A subwoofer can be connected to the cinch socket of
the SUB OUT 6 output. This is automatically con-
trolled by the device.

5.4 How to use

NOTE: the device remains in standby mode after being
switched off. In this mode, the power consumption of the
device is low. Pull the power unit 11 out of the wall socket
to disconnect it from the mains.
• Connect the power unit 11 with an easily accessible
wall socket. The display 1 shows – –. The device is
now in standby mode.
6
GB
Remote
control Display
button
AUX 31 AUX
LINE IN 29 LInE
HDMI
Hd
(ARC) 17
OPTICAL 18 OPtI
bt
30

6. Operation

NOTES:
• All adjustments can be conveniently carried out with
the remote control. The basic functions can also be car-
ried out with the buttons on the device. Operation of
the device in the instructions is usually described with
the remote control.
• The device switches to standby mode ...
®
... if no Bluetooth connection is established within
20 minutes or
... if either no signal or only a very weak signal is re-
ceived for approx. 20 minutes, and the controls
have not been used.
• Press the button 32 to switch on the device from
standby mode.
• Press the button 32 to switch the device into standby
operation.

6.1 Selecting the type of connection

1. Press one of the AUX 31, LINE IN 29, HDMI
(ARC) 17, OPTICAL 18 or
the desired connection (see "Overview - Connections"
on page 6).
2. On the audio device you can now start playback and
select and control the music tracks.

6.2 Sound settings

NOTE: Changes in the sound settings are shown on the
display 1.
- Volume: V00 ... V40
- Treble sounds: t -4 ... t 4
- Bass sounds: b -4 ... b 4
Controlling the volume
• During playback, press the VOL –/+ 22 buttons on
the remote control or VOL –/+ 4 on the device. For a
faster change of the volume, you can also keep the
buttons pressed.
Muting the device
1. Press the button 16 to mute the volume. The volume
previously set will flash on the display 1.
2. To switch the sound back on, press the button
again or one of the VOL –/+ 22 / 4 buttons.
buttons 30 to switch to
16