Connecting The Headphones; Connecting An External Playback Device; Operation Using The Controls On The Device Or Remote Control - Silvercrest SPSS 125 A1 Operating Instructions Manual

9. Connecting the headphones

You will find a 3.5 mm headphone socket
 Insert headphones with a 3.5 mm jack plug into the headphone socket.
When headphones are connected the speakers are disabled. Volume adjustment is still
possible to change the headphone volume.
WARNING!
Risk of hearing damage!
Please note that listening to audio material at a high volume
for long periods of time can lead to hearing damage.
 Before pressing play, set the volume to the lowest setting.
 Start playback and increase the volume to a comforta-
ble level.

10. Connecting an external playback device

You can use the AUX connection to connect an external playback device (for example a
CD player or MP3 player).
 Switch the CD sound system to standby mode.
 Switch off your external device.
 Plug the end of a 3.5 mm jack cable (not supplied with the device) into the AUX sock-
et on the front of the device.
 Connect the other end of the cable to your external device.
 Switch on your external device.
 Press the
button on the device.
 Press the SOURCE button once or several times until you see AUX in the display. The
audio signal from your external device will now be played back.
11. Operation using the controls on the device
or remote control
You can activate the main play functions on your CD player using the buttons on the de-
vice.
In these instructions, we refer to the remote control buttons. If reference is made to the con-
trols on the device itself, this will be clearly indicated.
22 - English
on the front of the device.