Connecting To The Mains; Remote Control; Inserting The Backup Batteries - Silvercrest CM-3500 User Manual And Service Information

Connecting to the Mains

Connect the power plug of the power cord (26) to an easily accessible wall
outlet.

Remote control

Open the battery compartment on the back of the remote control.
Insert two of the supplied batteries with the correct polarity into the battery
compartment. Note the + and – icons on the batteries and inside the battery
compartment.
Close the battery compartment.

Inserting the Backup Batteries

In order to avoid having to set the time each time you power the device off by
using the On/Off button (25) or after a power failure, you can use the supplied
backup batteries. This keeps the clock alive over a longer time.
Proceed as follows:
If it is still powered on, power the device off.
Open the battery compartment (24) on the back of the device.
Insert two of the supplied AAA-sized batteries into the battery compartment
respecting the correct polarity. Note the + and – icons on the batteries and
inside the battery compartment.
Close the battery compartment.
If you have programmed a wakeup alarm, it will also be
backed up by the batteries. If a short power failure occurs at
night, the system will wake you up successfully the next
morning whenever backup batteries are used.
SilverCrest Stereo Hi-Fi System CM-3500
English - 15